0
If you have a carburetor, there is a crew on the driver side behind the throttle cable it usually has a spring on it if you turn it to the right it idles up left it idles down
If its a fuel injected motor idle is handled by the computer. There usually is a "base idle speed" around 800-1000 RPM. This normally doesn't need to be adjusted.
Have a look for carbon build up on the butterfly as well, this will influence idle too.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
Will a two barrel carburetor on a 302 ford get better fuel economy than an efi?
No
What is the ignition timing for 1970 mustang 302 engine?
The ignition timing for a 1970 Ford Mustang with 302 - V8 - 2 barrel carburetor is : ( 6 degrees BTDC )
What is the horsepower of a 1978 mustang with a 302?
The 1978 Ford Mustang - 302 - 2 barrel carburetor - is rated at 134 horsepower at 3400 RPM and 250 ft-lbs torque at 1600 RPM
Will a 4 barrel carburetor fit right on the intake of a 1979 302 with a 2 barrel?
Sorry no, the intake manifold would have to be changed
Will a carburetor ford intake fit on a fuel injected ford motor?
yes ,i've done it to a 302 and it ran fine
What is the point gap on a 1969 302 single point distributor?
In a 1969 Mustang , 302 with 2 barrel carburetor , the point gap is ( .017 with automatic transmission ) and ( .021 with manual transmission )
How do I know what kind of engine I have in my 1985 ford f-150 LARIATE Its an eight cylinder?
Look in your engine compartment for the VECI sticker ( Vehicle Emission Control Information ) on the fan shroud or in front of the radiator. Or , the 8th " character " of your VIN indicates which engine you have On the 1985 F series: " F " is the 5.0 L ( 302 cubic inch ) V8 with 2 barrel carburetor " N " is the 5.0 L ( 302 cubic inch ) V8 with fuel injection ( EFI ) " G " is the 5.8 L ( 351 cubic inch ) V8 with 2 barrel carburetor " H " would be a 5.8 L ( 351 C I ) V8 with 4 barrel carburetor ( Available in F150 ? ) " L " would be a 7.5 L ( 460 C I ) V8 with 4 barrel carburetor ( Available in F150 ? )
How much fuel pressure does a ford 302 need?
between 5-7 psi, If it is fuel injected or has a carburetor makes a difference.
How do you adjust a fast idle on a 1989 Ford F150 302?
probably a bad idle air controller.
Where is the egr valve on 1977 for f150 351m?
I don't know if it is the same but the EGR valve on my 1977 Ford 302 was underneath the carburetor at the back of a spacer
Will a 1979 ford 302 intake fit on a 1993 302 ford motor?
The intake on the 1979 Ford 302 engine is different than the intake on the 1993 Ford 302 engine. The intakes are not interchangeable.
Is a 86 ford crown victoria fuel injected?
Yes ======================================================== On a 1986 Ford Crown Victoria : The 5.0 liter / 302 cubic inch V8 engine is FUEL INJECTED The 5.8 liter / 351 has a CARBURETOR
