you can only adjust the rear drum brakes buy turning the star wheel on the automatic adjuster. there is a black rubber plug you can remove on the back of the backing plate to get the star wheel. or you can take the wheel and drum off and adjust it that way.
There are a couple of adjustments. The hinge bolts can be loosened to move the door up and down, also the striker bolts can be loosened to move the striker up and down along with in and out.
The main adjustment is done at the rear brake shoes inside the rear rotors.
http://www.wjjeeps.com/parking_brake.htm
you dont they are selfr adjusting
your drain on your radiator is on the bottom right hand side
Common issues with the rear wiper motor. Sound like you will be replacing it.
Hold down red button with R on left hand brake, pull the bake all the way back and down shift then release brake an button
The first thing that I would do is look at the arm of the brake pedal and make sure the arm is pressing against the brake switch, press the brake pedal with your hand and see if the switch head goes in. Also if you have someone with you have them watch the brake lights and use 2 fingers and press the head of the switch in and ask if the brake lights are on,it may be that the switch is bad. this would be step 1. depending on how old the vehicle is you may have a broken 12 volt wire or a ground wire, if your turn signals work and your taillights work I would first check the brake light switch. i have never seen 2 brake light bulbs go bad at the same time.
I'm not sure but try this, turn the key with one hand (gently) while with the other hand try (hard) to turn the steering wheel one way then the other.
how do we adjust hand brakes
you be a weirdo
there is a small long bolt on the left side of the brake handle tighten the nut to adjust
handbrake adjustment on cougar
put your car in reverse and pull the hand brake. done
buy a Commodore!
at the rear brakes. remove wheels, & brake drums, adjust rear brakes to specs, and the E-brake will automatically be adjusted.
to adjust the hand brake you first have to loosen the hand brake witch at the hand brake its self. simpley pull back the cover thatr sourounds the hand brake. u will then see a 6mm threaded rod poping out. the nut that is on the end has 2b screwd off. you will need a 10mm socket for this. adjust totaly off then ur brakes will be free. once u have done your rear brakes then u can adjust the hand brake up by tightening the nut until u hav about 3 to 4 clicks.
do you mean cavalier hand brake?
it is a self ajustment each time you put hand brake it is done
HOLD Foot Brake on and pull hand brake on and off 5 or 6 times there is also a cable adjuster under centre console remove box at rear to get to it you may need to service calipers if brake wont adjust hand brake works off front brakes not rear
change hand brake cable citreon relay