Adjust the striker plates.
I have a 1996 Sub. The doors do not close as easily as they once did. Adjusting the striker plates is one way to fix it but in my case it would not help. One the suburban door hinges are two pins. There are small metal sleeves with slightly different diameters for the top and the bottom. It is those sleeves and hinge pins that have caused my door to become loose. The fix is to repalce the pins and sleeves. About 12.00 per hinge. You have to be careful becasue there is a spring on the hinge and the door is very heavy for a one person job. I
There are just some simple things that your average person just can not do. this is one of them. saying that just makes you want to prove me wrong. so my question is, if your not smart enough to figure out your problem why are you suddenly able to correct it.-give up now before you make things worse. (well maybe just hit your latch pin with a hammer and get on with your life). what do i care what i say nobody listens to me anyway
believe it in the front grill or under the hood.
To set the timing on a 1994 GMC Suburban you need to warm up the engine while the car is either in park or neutral. Next, you adjust the distributor until the timing is set to where you want it.
Junk yard? E-Bay?
How do you remove the steering wheel on a 1994 suburban?
where is the heater control valve on a 1994 2500 suburban
Check your radiator hose
check your hinges make sure the doors are not sagging or you can get new weather stripping and replace the old j.c. Whitney should have it
Warm it up,....un-plug the pip conn.under the glove box(tan/black),adjust the dist.to read zero degrees before top-ded cntr,..
It is a vent tube to let pressure out of the differential housing.
Located between the front two spark plugs on driver side of engine.
I don't remember if the 1994 was on the front of the engine or was in the fuel tank. If it is on the front of the engine it's about $150.00. If it is in the fuel tank the pump costs about 300.00 and labor is about $150.00.
in the front doors their 6 1/2 in the back for a pickup their 4x10