I posted this question and thought I would give additional detail. My front wheels are wearing on the inside. The vehicle rides smooth and straight, down the road. I think the only adjustment I need to make is the "Toe". The three adjustments involved in an alignment are caster, camber, and toe in. The actual adjustment of these angles is beyond the scope of the home mechanic and must be performed at an alignment shop. The adjustments must be made in relationship with the vehicle centerline, the ball joint axis, and the ground, it is an exacting process in which expensive machines are used to determine the many factors involved in making an adjustment.
you have to grind slots in the nuckle, then slide the nuts in or outwards, depending on what type of camber you want.
Same as the Caravan...
How do I adjust the idle on a 1994 Dodge Caravan?
Dodge Ram two wheel drive trucks camber corrections are made using the slotted pivot bar on the upper control arms. On the four wheel drive trucks the camber is preset at the factory.
Timing is not adjustable
The cable does not have any adjustment.
use tools
You cannot adjust the belt tension on a 2000 dodge grand caravan. This vehicle is equipped with an automatic tensioner. If tensioner is frozen or will not hold the belt tight, it must be replaced.
oil filled lifters no adjustment
Rear wheels are not adjustable. Front caster is not adjustable To adjust front front camber, loosen the spindle-to-strut bolts and tile the wheel manually. If greater adjustment is needed, a camber adjusting bolt kit is available from parts stores. To adjust front toe, loosen the tie rod jam nuts, then rotate the inner tie rod on each side to set toe.
The fuel filter on a 2008 Dodge Caravan is part of the pump module inside the fuel tank.
The headlights on a Dodge Caravan are adjusted by turning the screws located on the top and side of each light. They should be adjusted with the lights pointed at a wall for accuracy.