Want this question answered?
how do I adjust headlights
9006 for the low beam, 9005 for the high beam
The screw is used to adjust the headlight beam. Pull towards a wall, and you can see the beam projection to set the headlights evenly.
9006 low beam, 9005 high beam
There is a screw (phillips) located next to the lo-beam housing, to the left or the right depending on which side you're going to adjust. Turn to the left and the beam will pitch upwards and to the right it will pitch downwards. Have fun ;D.
AnswerThey should be factory set. If they are not aimed properly, see your dealer.Or you can do it yourself by adjusting the adjustment screw located on the bottom of the head light and be sure the lights are on low beam.
I believe that after you turn the low beam headlights on , you pull out on the headlight switch
headlight switch is probaly your trouble
The adjusting screws for the low beam headlights on a 2004 Mini are on the sides of the headlights. There is a screw on the side for adjusting from one side to the other. There is also a screw on the bottom for adjusting up or down.
According to the 2002 Ford Explorer Owner Guide : The LOW BEAM headlights take bulb ( # 9006 ) Also , the HIGH BEAMS use # 9005
To adjust your headlights on 2005 Ford Taurus, first open the hood of your car and turn the lights on, find the headlight adjusters beneath the hood, and turn it counterclockwise to raise the beam or the other way to lower the headlight beam.
get a set of stick on beam deflectors. these deflect the beam from left to right for European contries. to adjust the light them selves you cant you would have to get a pair of European headlights for that.