To adjust the idle speed on a 1993 Honda Accord, you will need to locate the adjustment screw which is located on the throttle body. This can stick at times due to obstructions. Once the screw is located, apply carb cleaner to loosen up any debris which may be causing the idle speed to be off.
On a 90-93 Honda Accord you can adjust the idle with a screwdriver. On the throttle body there is a screw on the top left above the intake duct. Just adjust until idle is in correct range (usually around 700)
you can't its computer controlled, unlike the old carburetors with an idle air mixture screw to adjust, its set by the factory and you can't screw with it
Check your radiator is full
manually under the hood.
stock idle speed with transmission in Nutural should be 550rpm. they allow a +/- 100 Rpm, so a range of 450-650rpm is normal.
It will not idle at the proper speed (750 RPM).
you can't
how to change manual ignition switch on a 93 Honda accord
reset accord 93 computer
No, the only transmission that fits exactly is a 94-97 Accord. The 90-93 Accord can be used, but you will need the 90-93 flywheel. Chuck
the speed sensor is on the transmission i aso know you can adjust the speed reading according to tire/rim size or different rear-end gears with a hypertech power programmer.
700 rpm if you have a manual transmission, 750 rpm if you have an automatic