Want this question answered?
How do you adjust an F-250 shifter cable? 2000 model
The 1997 Chevy Blazer shifter cable will have swivel nuts on each end of the cable. Connect the shifter cable and turn the swivel nuts to the right to install the shifter cable.
If the cable is broken you should replace it.
That would be the shifter cable.
The shifter cable connects the shifter to the transmission.
How do you adjust a transmission passing gear cable on a 95 chevy tahoe /
The 1989 Toyota Camry shifter linkage cables have adjustment swivel nuts on each end of the cable. Turning the swivel nuts will lengthen or shorten the shifter linkage cable.
If the transmission shift selector is cable operated, the adjustment would be located at the transmission end of the cable, where the cable housing is attached to the bracket on the transmission.
You adjust the cable on top of the shifter module ( just below brake master cylinder) If you can't recognise this get someone else to sit in driver seat (with ignition on, but not running) and shift gears . You will see the cable moving on top of module. This bolt holding the cable can be adjusted VERY carefully.
you just have to disconnect the shifter, take the old wires out then re wire the new ones in there
Loosen the shifter cable not on each end of the shifter cable. The shifter cable will come off. Reverse the process to install the new shifter cable.
you don`t know?