http://www.centuryperformance.com/valveadjustment.asp
yes
If it is a solid lift cam, Then the valve specs will be written on the cam card that came with the cam. If it is a hydraulic lifter cam shaft then you adjust the valves like any other camshaft.
on a 350 engine to adjust valves tighten them down with engine running then back them off until it smooths out probably about a quarter of a turn
probably need to adjust your valves
With the engine at TOP DEAD CENTER (TDC) Adjust the exhuast valve to .007 and the intake to .005.
There are no torque specs on 350 Chevy engines. Set solid lifter cams with cam manufacturers backlash specifications, set hydraulic lifter cams with 0 backlash plus 1/4-3/4 turns preload. To my knowledge you don't torque valves, you adjust them.Each one must be done individually.
The 2010 Lexus IS-350 has 24 valves.
The 2011 Lexus IS-350 has 24 valves.
The 2009 Lexus IS-350 has 24 valves.
The 2014 Lexus IS-350 has 24 valves.
The 2007 Lexus IS-350 has 24 valves.
The 2008 Lexus IS-350 has 24 valves.