If this faucet was recently purchased, return it to the store because you do not have the proper parts. If the screw will not go in, the threading is wrong, or the threading is stripped, or there's still something in the hole preventing it. You won't be able to attach it securely any other way.
No, if the current faucet doesn't have a sprayer, there is no place on the faucet to attach the sprayer. It would attach on the underneath side of the faucet in the center.
American Standard Faucet offers a variety of finishes for all types of faucets such as blackened bronze, oil rubbed bronze, polished brass, satin nickel, and traditional stainless steel.
Faucets can be expensive depending on the brand you buy, but there's also a fine line between quality and cheap. American Standard faucets provide a great balance between quality product and budget friendly. Stylish faucets that give the same quality you'd get from a faucet for over double the price. American Standard faucets are also easy to fix. Replacement cartridges and washers are easily found, and American Standard supports their product as well. The faucets come apart easily for easy cleaning and maintenance. You can't go wrong with a good quality American Standard faucet.
From underneath. There are two different types. There will either be a large nut on each side where the water lines attach or there will be a horseshoe shaped plate in the center that is held in place by one smaller nut. Take the supply lines off and remove the nuts that hold the faucet in place and lift it up.
When searching for a new, reasonably priced American Standard faucet, it's best to check with local carriers. Any place that sells hardware would most likely have it. Check your sunday paper for deals also such as coupons offering a percentage off.
No, they have to have a place to attach it. The fitting is in the middle of the faucet underneath directly under the spout.You can also add on a hose sprayer to end of the faucet but you need a special fitting to do this. The fitting needs to be adapted with a quick release. A replacement sprayer with hose is then attached to this fitting along with the quick release. You then attached the whole unit to the end of the faucet. Neat part is that if you move you can take it with you.
no, you do not need a new faucet spacer, just keep the old one, and keep your fingers crossed.
There are many companies that manufacture shower taps. Among these companies are Delta Faucet, Peerless Faucet, Moen Faucets, Kohler, and American Standard brand faucets.
Faucet parts in Arlington Texas
You have to have a faucet that has threads like you find on the outdoor faucet. Some have them and some don't. If you're trying to attach a hose meant for indoor faucets, you'll have to remove the aerator (the small nozzle on the end of the faucet) so you can screw the hose onto the faucet.
You either tighten up the nuts and bolts or you buy a new one.
You don't as it defeats the purpose of the AIR GAP Read your plumbing code