Want this question answered?
You dont really have to bench bleed the cylinder. It makes it easier to get the air out after its put on. If you dont bench bleed it, you just have to pump it until your leg wears out to get all the air out of the line.
If the cooling system is working properly, it will bleed itself.
how to bleed 2002 saturn vue 3.0
On a 2002 Ford Ranger : The Mass Air Flow Sensor is between the engine air filter and the engine air intake tube
If This Is To Remove Air From Fuel Lines. Forget It. You Do Not Have To Bleed The Fuel Line.
put an air compressor hose on one end
There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.
The 2002 Ford Escort zx2 does have an air intake air temperature sensor. The sensor is at the top of the engine on the drivers side.
I'm not sure why you would want to do this. The fuel pressure reguator will automaticly bleed air from the system.
There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.
ford need to say more
On a 2002 Ford Explorer : The Mass Air Flow sensor is between the top section of the engine air filter housing and the engine air intake tube