You need to check out the Bongo Fury website as this site has all information on most Mazda Bongo's. If you join the Bongo Fury members club you also have access to downloads, one of which shows you how to bleed the cooling system step by step. Hope this helps!
You should not need to bleed coolant. Ever. If the coolant is filling up on its own the stuff in there is not coolant and you have a big problem.
The Villager engine does not have a coolant bleed valve.
procedure on how to bleed air out of coolant system on 97 saturn ls
how do i bleed my accord v6 2000 coolant system, its has air and the rev's gone up & down......
There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.
There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.
To bleed the coolant system on a 1998 VW Beetle, remove the top from the overflow tank. Run the car for 10 to 15 minutes to force any air out of the system, then check the coolant level. Add coolant as needed.
It bleeds automatically. There is no bleed valve or screw and no bleeding is necessary.
It is not necessary to bleed the coolant system. If you mean "drain" the system, there is usually a plastic plug on the radiator or, you can pull the lower radiator hose off.
Start by taking the top off of the coolant overflow reservoir. To bleed the system, run the 1998 VW 2.0 Beetle about 10 minutes, then check the coolant level. Add coolant if needed, then replace the reservoir top.
No.