You bleed this the same way as a brake line. 2 people, full reservoir, dot 4. Make sure the bleeder is easy to open. With bleeder closed, have other person pull in the clutch and hold it in,you open the bleeder to let out the air or fluid, then close the bleeder, when you have it closed, then tell the other person to let go of the clutch. Repeat this till all the air is out.
I use Motul 10w40. Good for the engine, clutch and stator. Check with your Honda dealer.
How would you change the headlight bulb in a 1987 Honda goldwing? GL1200
Look at the back of the engine where the clutch line goes in the engine. 3 bolts to take out and it's in your hand.
The rear master on the Goldwings controls both the rear caliper and one of the front calipers . I think it is the right. bleed the front right first then the rear Hope this helps.
Just got this bike. Never mind- just researched and noted the bike has a hydraulic clutch/cylinder - I checked and the fluid was almost out - that would explain it.
3.2 Liters or 3.4 U.S. quarts. That is with the oil filter changed also.
1984 to 1987 same engine same bike.
The first Honda Goldwing with fuel injection was the 1985 LTD model produced until 1987. When the Goldwing engine was enlarged to 1800cc in 2001 then that model and all susequent models had fuel injection.
A reverse gear can be added to a 1985 Goldwing Aspencade. It is best to have it done at a specialty shop that works with older Goldwing's.
Remove the chrome cover, pull out the plug cable, use the spark plug socket with a ratchet.
That would be 345cc or ( 11.7 oz ) Be sure equal amount in each fork.
http://en.allexperts.com/q/Motorcycle-Repair-837/1985-Honda-Shadow-Clutch.htm