Ensure Power Steering fluid is to full mark. Start engine. Turn wheels slowly all the way the right until they hit the stop and hold for a minute, then slowly turn all the way to the left and hold for about a minute. You may need to repeat a couple of times. This should bleed the air from the system. I don't know of any vehicle which has a bleeder valve for the power steering reservoir or power steering system.
maybe 30 minutes, just be careful and follow instructions or you'll have to bleed the whole system
how do I bleed my power steering pete thank you
The same way you bleed brakes, but use the little bleeder valve on the slave cylinder. The same way you bleed brakes, but use the little bleeder valve on the slave cylinder.
There is no reason to ever bleed a cooling system.
You must bleed the clutch dampener before bleeding the slave cylinder its that weird curvey steel hose before the slave unter the passangers feet. look arount the side of the dampner for the bleed screw
turn steering wheel lock to lock several times.
fill to mark with fluid.start engine and cycle the sterring wheel left to right until it feels light that it bleed job done
Yes, This is part of hydraulic system
Where is the coolant bleeder valve located on a 2003 nissan maxima 3.5
turn the steering wheel lock to lock several times it bleeds itself when it is running
cut up the sable and make it run
If you did not bench bleed the master, you need to do that.