Are you sure that the lines are plugged? Do you have a pine needle or leaf problem? It could be a plugged impeller. What are the symptoms?
k
Fiberglass pool shells are shipped in a single piece directly from the manufacturer. As a result, you don't actually linea pool with fiberglass the way you would with concrete or vinyl. Instead, installing a fiberglass pool simply means digging a hole in which to place the already completed shell.
Inground vinyl is better, their is less exposed part to the oxigene, therefore, last longer.
Yes there is no reason why not.
It would be easier to replace with a floating skimmer Check poolrite dragonfly
with the use of skilled professionals to dive the pool and pressure test the lines
Don't do it. Too many possibilities for leaks. Get Fiberglass or vinyl pool, learn to install that instead.
Justin Bieber has a inground pool
You would have to hire a fiberglass pool repair company to do the several layers of reconstruction of a fiberglass pool. The "gelcoat" is part of the surfacing proceedure and can not be purchased in a store or wholesale wharehouse.
Inground concrete or fiberglass are the easiest pools to maintain. When you get into synthetic materials like vinyl and plastic, it's harder to find chemicals that will do the work without damaging the pool.
You have to drop the water level below the piping of the pool, then take compressed air and blow out the lines, normally you disconnect the pump and filter and blow the water lines from the direction of the filter and pump back towards the pool cap the pool inlets and outlets, and put the pink R. V. anti freeze in the lines so that they do not crack.
An inground pool is typically lined with either gunite (concrete), fiberglass, or vinyl. Gunite and fiberglass are roughly the same cost, whereas vinyl is considerably cheaper. With the lower price comes less durability, as vinyl lining has to be replaced every 8-10 years or so, whereas the other two can last for decades. Vinyl is also much easier to puncture or otherwise damage. That said, many people still prefer vinyl inground pools due to the lower cost.
There are three main types of inground swimming pools: concrete, vinyl and fiberglass. All of which are prone to the occasional crack. Luckily for the homeowner such cracks can be repaired. If you are handy you can purchase a do it yourself repair kit at your local pool specialty store.