Want this question answered?
The factory system can not be bypassed.
The Passlock security system is the problem. Should be recalled. Go here http://newrockies.com/?ap_id=craigpeate for a module to bypass the system completely. The resistor workaround at the key isn't always the only problem. I tried it on my 99 Suburban and it didn't do any better with the resister bypass. You need to eliminate the entire security system. Buy the pro module for $179 plus shipping and save yourself the hassle of dealing with it ever again.
To bypass the security pull the fuse. For the other issues there may be a problem with the computer in the car.
how do you bypass the anti theft security chip key if your only key is bad or if you have no key at all please help
Caliper pins.
If you have the 2.2 L engine in that 99 S10, there is no distributor in that vehicle. It has a DIS (Distributorless Ignition System).
Trouble code P1526 means: Air Bypass Systemcan i see some pics of the air bypass system
How to overide security system that causes no fuel to motor in 99 Chevy suburan 1500 4wd security light flashes when it goes solid it starts nut takes 20 mins of turning on and off
How to overide security system that causes no fuel to motor in 99 Chevy suburan 1500 4wd security light flashes when it goes solid it starts nut takes 20 mins of turning on and off
No. Different generations of S10 altogether.
The 99 Chevy S10 does not have a fuel pump reset button. The pump is controlled by the relay unit.
The Passlock security system is the problem. Should be recalled. Go here http://newrockies.com/?ap_id=craigpeate for a module to bypass the system completely. The resistor workaround at the key isn't always the only problem. I tried it on my 99 Suburban and it didn't do any better with the resister bypass. You need to eliminate the entire security system. Buy the pro module for $179 plus shipping and save yourself the hassle of dealing with it ever again. Or you could go to the dealer and have them replace the entire system for over $1000. They will have to replace the key/tumbler/hall effect switch/wiring and EVO-Passlock module to get it right.