Gauges to allow a person to calculate nut bolt size are widely available. Measuring the thread manually can be unreliable so it is far preferable to use a gauge.
Gauges to allow a person to calculate nut bolt size are widely available. Measuring the thread manually can be unreliable so it is far preferable to use a gauge.
10-32 unf-2a <<>> The wire size does not need to be calculated. Use a wire terminal end that crimps to the wire. These terminal end come in various wire sizes and bolt hole sizes. Pick the correct end for the wire size you are using and then in that wire size range, pick the correct bolt hole size that fits the bolt.
1.5d+ 1 or 2, where d is the bolt size
the size is E14
1/2"x2" m.s bolt
a star bolt is actually called a torex bolt and most small ones you see will be T15 size or t20 size
The size is probably an half inch bolt to 3/4 bolt.
To calculate wrench size you measure across the flat surfaces of the nut or bolt, then pick a wrench marked with that size. Be careful, there are metric and SAE nuts and bolts and some wrenches are close but not right. -For instance you should not use a 1/2" wrench on a 12 mm nut. -It may look right, but will round the edges of the nut.
which bolt
What size bolt for a 2005 Honda civic DX power steering tank bracket..
it is the same size of the bolt same as the hole and thread. the higher the grade of the bolt the more touque you can apply.
A 1 1/4" wrench will fit a bolt of the same size .