there are multiple ways for different models. You can cancel/ clear it through a maintenance CPU. If you do not have access to one you may have a rectangular hole immediately to the left of the service light your key should fit in this hole and push in the button in the hole, the light should turn green then go off. If no hole press in your rest button for you trip meter while the key is in the off position, turn the key on while still holding the reset button for about 10 sec the light should turn off. And if all else fails you can just disconnect your battery cables for 60-180 seconds and it will reset your "dummy" lights. ;0)
Oil change
I means change the oil or rest the oil % indicator.
The wrench light in a Honda Accord means that the vehicle needs maintenance soon. It usually means that you are over your recommended mileage interval for service and that it is time for an oil change and other similar maintenance procedures.
That information can be found in your drivers manual. That symbol is reminding you that certain maintenance is required. This info can also be found in the drivers manual.
oil change
It's the reminder to change your oil.
The wrench symbol is the service indicator. On the 406 the wrench symbol is displayed with milage to service when ignition is switched on.
If a wrench lights up on your dash it means there is a problem with the engine.
A wrench is usually the tool symbol because it's universally recognised and a simple figure.
17 mm socket or boxed in wrench.
Means the oil change reminder needs to be reset.
use an Allen wrench not a socket or open or box wrench.