ON THE TOP OF THE INTAKE IS A STEAL WATER NECK THAT THE TOP RADITOR HOSE IS ATACHED THE TWO BOLTS THAT HOLD IT DOWN NEED TO BE REMOVED THE SURFASE CLEANED AND THE WATER NECK CLEANED REPLACE THERMOSTAT AND O-RING I PUT A THIN LAYER OF SILICONE TO HELP WITH POS. LEAKS DUE TO CORISON .
Stuck closed thermostat or a bad head gasket.
remove the hose and look into the housing the thermostate should be there
never it should out last the engine
if your 2000 blazer is like my '99 (2 dr) there is no separate rear window washer tank; its at rt frt corner of engine bay.
A 3/8 Allen key.
Follow the top radiator hose to the engine and you will see were it clamps onto a housing that's bolted to the engine. Remove that housing and it will be there.
why is my 1997 chev blazer over heating
When the battery does not have enough voltage to turn the starter over it will sometimes make a clicking noise.
change the camshaft position sensor, workind on mine.
What is the easiest way to replace the starter motor on a 2000 chev Venture?
235/75R15
Driver's side, front to rear, 1-3-5. Passenger's side, front to rear, 2-4-6.