When to change out a timing belt on 06 vectra sri Mileage wise
The timing marks, on your 1.6 liter engine, can be found on the front of the main pulley. The timing marks will be scattered around the outside of the pulley.
What car and engine? How is valve and ignition timing?, fuel pressure, etc?
If a new timing belt was installed but the valve timing does not correspond with the pistons ie: the valves opening as the pistons reaching top dead centre ,,then it will be jamming.. bending valves and possibly damaging pistons.. when fitting a new timing belt or chain you have to be very careful of cam/valve position in respect of the pistons
To change PVC valve on a 1993 Nissan 300zx, first remove the oil dip stick and remove the tension clip from the PVC valve hose. Then remove the hose and the old PVC valve. Replace with a new PVC valve.
It is very important to change PCV valve. If valve is old it will plug or seize. This will cause oil pressure to rise and may cause leaks. Most likely the valve cover gaskets will leak if PCV valve is plugged.
you need a turbo first!!
If you are speaking of the Vauxhall Vectra SRI (normally aspirated engine) 2.2L then the approximated time is 8.6 seconds. This is the 16 valve engine that has 154hp.
idle control valve faulty or needs cleaning
Its a 16v rocket marra
10w40 semi synthetic.
The idle air control valve on a Vauxhall Vectra B is located on the intake manifold. The valve is placed in front of the air tubing, right behind the engine cylinder head.
it should be under the right hand side of the engine cover!
1.4 Eight valve engine. The water pump is the timing belt tensioner on this model. you need to slacken the pump and rotate it to tension the belt.
Variable Valve Timing. This means the valve timing self adjusts to set the optimum time they open and shut to maximise engine fuel/power efficiency.
between motor and fire wall under inlet manafold go behind coil pack
if u mean the egr valve it is on top of the inlet manifold you will find it under the plastic cover on top of the engine if u remove the 3 star shaped bolts
The timing marks, on your 1.6 liter engine, can be found on the front of the main pulley. The timing marks will be scattered around the outside of the pulley.