0
How do you change a fuel filter on a 2004 Ford Escape Is the fuel system under pressure and is there a way to releive it before removing the fuel lines Are any special tools required?
Wiki User
∙ 14y ago
Remove the gas cap to relieve the pressure in the fuel system prior to changing the fuel filter. You will still need to use some kind of container to catch any excess dripping fuel.
Brian
I just changed the fuel filter on my 2005 Escape today. The filter is cannister style and located under the car, on the driver's side, about even with the rear door. It is held in place with what amounts to a large hose clamp, and is in a protective sleeve. The fuel line end fittings are retained with plastic clips, which can be released by squeezing the tips together and pushing them back into the fitting. If you break the clips, don't worry - a new set comes with the replacement filter. I used a Fram G3802A filter, which fits most Escapes. The fuel system is under pressure, so be careful. I don't know if there is a way to relieve it, but used a pan to catch the fuel that spurted out, and had no problem. There may be a special tool for servicing this filter, but I did fine with an ordinary screwdriver and pliers. Hope this helps!
David
I just changed my 2004 Ford escape fuel filter and i used this very helpful answer. the only thing i have to add is the fuel is under lots of pressure so when you go to release the the fuel filter wear some sunglasses or anything else to protect your eyes! other than that its really easy!
Fabian
Remove R3 (fuel pump relay) and idle engine until it stops. Then crank starter for 5 seconds. Only a little gas will come out then, most of it from the filter itself.
-=Vernon
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you replace the key ignition switch in a 1970 Chevelle SS?
several special tools are REQUIRED to perform this task, which involves removing the steering wheel.
Chevy Caprice oil pressure switch?
You do NOT reset an oil pressure switch. It has to be replaced and a special socket is required. Before doing so you will need to have an external mechanical gauge installed to be sure that you do have pressure.
Are there any special body pillows for people who suffer from lower back pain?
There is not a special body pillow for people who suffer from back pain, but it is recommended that the pillow be used for someone that sleeps on their side and it should be somewhat firm. The pillow should be placed between the knees and the knees should be pulled up. This relieves pressure on the lower spine, which in turn helps releive the pain.
Where is the fuel filter on a Daewoo Nubira 1999?
The fuel filter is located at the rear of the engine bay, at the top near the firewall. Take care removing and a special tool may be required.
Is there a special tool for removing rear brake pads on 2005 town and country?
removing them, no, installing them, yes
Can the intake gasket on a 1987 Chevy G10 Van 5.0 be changed with standard garage tools or should it be taken to a shop?
that job requires removing the distributor, no other special tools required
How do you change the ignition key lock in a 1979 Camaro Z28?
there are about 3 special tools required to do this job. It includes removing the steering wheel, horn assy., and the spring loaded center support.
Where is the gas filter located on a 2002 Ford Escort?
It is on the frame under the car near the gas tank. Before removing it you will need to relieve the fuel pressure. Also, it will require special tools.
Why is Athena the Goddess of Strategical War?
in Greek mythology, Athena was born in a very special way. one day, Zeus had a head ache and asked his son Hephaestus to crack his head open to releive the pressure. when hephestus hit Zues' head, Athena popped out. therefore, Athena became the goddess of wisdom and strategy cuz she was born from Zeus' thoughts
What is the process of removing wool from sheep using special Clippers?
shearing
Are the special forces required to get tattoos?
No
What tools and materials are required for replacing a heater core in a 1993 Cavalier?
Standard tools, nothing special. The problem is getting to the core, and removing it. This is a very difficult job. Take your time and remove whatever is necessary to gain access.
