If you pop the hood, on the back of the headlight housing, there are some wires with a snap on or twist on connection. If you disconnect them as you pull them out the headlight is attached to the other end of the connection. Make sure not to touch your new bulbs with your hands because the glass on a headlight bulb is designed to run at a high temperature, but the oils on your hand get hotter than the temperature they are suppose to operate and will cause them to blow or bust. If you do accidentally touch one, just wash it off with alcohol.
k8wdc
same as the 1994
For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.
A 1990 300zx headlight is recessed into the bumper. To remove it, first loosen the headlight bracket bolts. Unplug the lights and push the housing outward. Be careful not to ruin the weather stripping for the lights.
To change headlight in a 1994 Mazda 121, undo the top mounting screw. Slide a flat screwdriver behind the assembly abd pop out the fitting. Repeat with the other side to pop the other bayonet fitting and remove the old headlight.
Remove steering wheel disconnect Quick Connects unscrew switch and pull out put back in same way
ngk
around 4 and 1/10 quarts.
They're all the same from 90-96, you're golden
You will have to remove the engine.
Twist the socket 1/4 turn and pull out.
How do you I change a headlight on my Camry