Both hoses are screw in on the steering box side. You will have to pushback and rotate the protective cover on the sterring shaft in order to get to both hoses. This has to be done first. Unfotunately on the Suburban, you have to remove the Power Steering pump in order to be remove either the pressure (high side) or the return (low side). The high side is a screw in type hose on the pump, the low side is a clamp on type hose that you may need to cut the clamp off in order to remove the hose, you can use a worm gear clamp to reinstall. Hope this helps.
See Ganderton's Answersearch for "How do you change power steering fluid". Hope it Helps.
It requires a power steering pulley PULLER. You can rent them at some parts stores.
you can rent one at a auto parts store
It is on the bottom of the steering gear box.
How do you change the oil filter sending unit of a 1999 suburban?
Suck out the old and put in the new.
No steering power or brake power ford explorer 1999?
That pulley is a press fit type. There are not any threads. You will need to rent/buy some pullers for that power steering pulley.
no. mine does not have power steering and it's a 1999 sl1
It is presssed on and it requires a special puller to remove it. Advance auto parts stores will rent one to you.
change low beam lite in 1999 suburban
only 2 reasons -- not enough power steering fluid or bad part