Removing the serpentine belt on a Pontiac Aztek requires loosening the adjustment pulley. Once the pulley is loose the serpentine will have enough slack to come off.
The alternator on a Pontiac Aztek is replaced by removing the engine accessories, loosening the serpentine belt, and removing the retaining bolts. The alternator can then be pulled from its retaining bracket and a new one installed.
its just one serpentine belt
This link has many helpful diagrams. There should also be one under your hood by the belt labeled Accessory Drive Belt Routing. So if you find the diagram on your car you can match it to the diagram in this link and it will even tell you what to loosen to get the belt off. http://www.2carpros.com/car_repair_information/tec_info/2001/pontiac/aztek/2001_pontiac_aztek_drive_belt_routing_diagram.htm
diagram for serpentine belt on 1996 Pontiac Bonneville se
To change the serpentine belt on a 2003 Pontiac Bonneville, loosen the tensioner pulley and remove the old belt. The tensioner pulley is the wheel in the belt system that has a bolt through the middle in a slot that can be adjusted. Put the new belt on and tighten up the pulley.
Absoultly not.
The Pontiac Aztek has a chain which will last the life of the engine and should never need replacing until the engine is overhauled.
How do you change a serpentine belt on 2006 Envoy
i have a 98' Pontiac grand prix gtp. i got the 2 serpentine belts replaced for $200.
how do you change serpentine belt gm 3.4 2003 venture
How Do I change the serpentine belt on a 1989 Cadillac Eldorado ?
how do you change the serpentine belt on a 2005 kia sodna