At the top of the belt path there is a belt tensioner with a pulley attached to it; this is spring loaded. Take a wrench and pry against the tensioner.Simply remove the belt and install the new one as the tension is relaxed. Make sure that you review the belt path prior to removal.
Check
= Here is a great link on how to change a serpentine belt with pictures and videos. = = = = = = = = http://www.expertvillage.com/video-series/791_serpentine-belts.htm =
The Buick 3800 V6 Does Not Have a Timing Belt.Has timing chain.
I need to know how do i replace a haeter core on a 1994 buick park avenue?
Use a socket and ratchet on the bolt that holds the 95 Park Ave serpentine pulley. Pull the ratchet to the side and the pulley will swivel, loosening tension on the belt. Remove the belt, install the new belt in the same manner.
4t60e
I have a '92 PA Ultra. The Ultra has the supercharger. There are two sets of serpentine belts for this configuration.
= How do you reset change oil soon light on 1993 buick park avenue? =
89 Buick park ave install a heater coil
Try looking in either a factory service manual, a Chilton manual or a Haynes manual. If you don't have a manual your local library may have one.
Loosen the tension on the 95 Buick Park Ave belt by moving the belt tensioner to one side. Using a socket and ratchet on the tensioner pulley, pull to the side an remove the belt. Install the new belt an release the tensioner to hold the belt into place.
Pry on the idlers (smooth pulleys) with a pry bar. They are spring loaded.