Depends on the year I guess. I have a 2002 Chevy S-10 and I had to remove the exaust pipe from underside of the starter and then just unbolt and remove...not hard once the pipe is off. You will need a socket wrench and a long extention to reach the bolts on the top of the pipe.
how do you change the oil pump on a 1991 s10 pickup
The starter solenoid is attached to the starter.
Follow the positive battery cable from the battery, it will lead you right to the starter.
What are the steps to change the heater core on a 1991Chevy S10 pickup ?
how to change front shocks in 01 Chevy s10
It depends on what year and engine you have but, if you follow the positive battery cable from the battery, it will lead you right to the starter.
The starter on a 99 S10 is on top of the transmission. It is at the back of the engine and can be removed from under the hood.
The starter relay feeds power to the starter when the switch is turned to start. The relay will be mounted either on the fender or on the firewall.
To change the starter on a 1998 s10, the motor mount will have to be removed. Support the motor on a jack with a board on the top of it, and remove the mount to get to the starter.
i needi have an 87 4 +cylender 2.5 Chevy s10 pickup and need the timing diagram in order to get it running. can you help?
Chevy S10 pickup 4cly 2.5 engine,how to change rear oilseal
in the oil pan. oil pan has to come off to change it. i dont know about the v6, but the 2.2 either have to pull the motor, or pull the starter, transmission, exhaust, and loosen mounts and jack motor up to change it!