The sensor is in the fluid container so take it off the vehicle and disconnect it and take the whole thing to the dealer who will have the part and gladly show you how to put it in.
The 2001 Villager washer fluid level sensor is inside of the washer fluid reservoir. The sensor can be access through the bottom of the washer fluid reservoir.
In, under, or near the washer fluid reservoir.
A sensor light on the dash will come on indicating the car needs new washer fluid. To change the fluid, you open the hood and locate the container with the washer fluid symbol on it. You can unscrew the cap and pour more water in.
Fill the washer fluid or repair the level sensor in the washer fluid bottle.
All you need to do is add washer fluid. If the light is still on, the sensor or wiring have failed.All you need to do is add washer fluid. If the light is still on, the sensor or wiring have failed.
NO!
There is a magnetic float inside the washer fluid tank that causes a magnetic sensor on the outside of the tank to activate when the fluid is low. Either the sensor is bad or the float is stuck.
The washer fluid sensor is probably bad.
You add washer fluid or fix the fluid sensor.
the sensor is located on the passenger side under the hood, look in between the bumper and the radiator all the way to the left, on top of the washer fluid container. the container is mounted to the front of the fender, you need a small hand gppd luck.
Low washer fluid or defective sensor in reservoir
If fluid is full - bad sensor?