Remove clip-on and red wire from back Remove belt by releasing pressure on the auto-pressure arm on passenger side of motor at front, near center at bottom. I used a 2-foot jack lever to push down while a second person removes belt with screwdriver remove 2 bolts holding down the reservoir in front of the lowest bolt on the alternator Remove 3 bolts Reassemble. 2nd' person needed to re-attach belt while i hold down pressure arm. Saved me 400 bucks
very carfully
No. The 91 Corvette has a larger roof panel than the 88 Corvette's. yes if you change the front anchoring brackets
go see a mechanic
It is built into the alternator.
no
Below the alternator
Inside the alternator. It's a small, solid-state device that is integral to the alternator.
yes it will fit
it should have an internally regulated alternator
Inside the Alternator.
German corvette Hiddensee was created in 1991-11.
German corvette Hiddensee ended in 1991-04.