0
How do you change an ignition cylinder in a 86 Chevy astro van?
Wiki User
∙ 15y ago
I have an 86 astro van and have my steering wheel off. I used a puller to get it off which was hard to get it in there unless you have long bolts. I got the black plastic cover off by turning (mind you I broke a tiny bit of the clip which has 3 slots holding it in) the cover and pulling it off. Then got to the switches (left right turn 4 way) took the 4 way stem off and now I am stuck here lol. I can't get past the steel dial. I am afraid to break it which is the horn and steering lock gear.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you remove ignition switch cylinder from 2000 Chevy astro van?
You can remove the 2000 Chevrolet Astro Van the ignition switch cylinder by removing the retaining ring. The retaining ring will need to be turned to the left. The ignition switch cylinder will slide out.
How do you change the ignition cylinder on a 1996 Chevy Astro?
==This operation requires special tools.== Remove the steering wheel, and tilt assembly, you can then see a black screw above the rounded area for the lock cylinder, remove this screw and the cylinder will then pull out.
How do you remove the ignition lock cylinder on a 1997 astro van?
Remove the retaining ring, from the top of your 1997 Ford Astro ignition lock cylinder. Remove the wiring harness from the back of the ignition lock cylinder.
Where is the ignition module on a 1999 Chevy Astro van?
Right under the ignition cap.
Does the ignition coil need to be grounded on a 2003 Chevy Astro?
It is advisable to have the ignition coil grounded on a 2003 Chevy Astro. This should especially be done when you are working on spark plugs and wires.Ê
How do you replace the ignition switch on a 2002 Chevy Astro van?
You will need to remove the ignition switch retaining ring in your 2002 Chevy Astro Van. Slide the ignition switch out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.
Remove ignition cylinder?
key switch tumbler removal on 1998 astro
How can you bypass the ignition switch on a 1994 Chevy Astro?
To bypass the ignition switch on a 1994 Chevy Astro, simply attach a wire to the ignition switch where it makes contact after the key is turned on. Run the wire to the push button and install at the lower part of the ignition switch to send power to the starter. Ê
How do you replace driver side window in 1993 Chevy astro van?
How do i change the window on a 95 chevy astro van
Do Chevy Astro come in 4 cylinder?
From the 1985-1990 model year the 2.5 liter Iron Duke 4 Cylinder was used in the Astro as the base model. These were the same engines used from 1985-1993 in the Chevy S10.
How do you replace the ignition actuator or rack on a 1995 Chevy astro?
what is an ignition actuator i work on Chevrolet and have never heard of it are you talking about the switch
Where is the ignition control module locaded on a 1995 Chevy astro van?
under the distributer cap
