0
Not sure on the 89 Geo Tracker but on most newer vehicles the tail light bulbs can be accessed by openening the rear door and removing a panel that allows access to the tail lights if this is not possible you should have some type of screws on the tail light lenses itself that can be removed to access the bulbs. , EzForJesus
my 91 Tracker 2 door had 2 small screws at the bottom of the tail light - I had to push the rubber fascia down slightly to get a Phillips screwdriver into the screws. Remove both screws, tip the bottom of the fixture out and you now have access to the 1/4-turn twist-out bulb holders. Change bulb(s) and reverse procedure.
Cass1959
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How do you change the brake light bulbs on a 1994 Chevy Corvette?
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
How do you change the brake light on a 2001 Nissan Quest?
The light assy has to be removed and the bulbs removed from the back.
How do you change the third brake light bulbs on a 1995 Chevy 2500?
Remove the two screws that hold the lens on, remove the lens and change the bulbs.
How do you change the brake lights on a 2002 Jeep Liberty?
The brake light bulbs ar removed from the rear of the light assy . Take it off of the body.
How do you remove the brake light cover on a 1991 tracker?
how do you remove the brake light cover on a 1991 gmc tracker? Do you go from the outside or inside?
Rear middle light on Lincoln Mark VIII does not work?
If you mean the brake light, you just have to change the bulb or bulbs.
What color are brake lights?
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
What color are your brake lights?
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
What bulbs go in a s-10?
Headlight bulbs, high and low beam, parking light bulbs, signal light bulbs, brake light bulbs, dash light bulbs, interior light bulbs, plate light bulbs, etc.
How to replace the third brake light on 1996 Chrysler sebring convertable?
I assume you only need to change the bulbs. Go into the trunk and look up. You should see the wires leading to the mounting point for the third brake light, you candisconnect the connectors and then change the bulbs this way.
I have a running light but when applying the brake the brake light doesn't come on?
check light bulbs and fuses. light bulbs have 2 elements in them, one for stop and one for running. if thses are ok, replace brake light switch on brake pedal
How do you change the brake light on a 1996 Lincoln Mark 8?
If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk. If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk.
