answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you change dipped beam bulb on 08 corsa?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change a sidelight bulb on a 53 plate vauxhall corsa?

How do you change a sidelight bulb on a 53 plate corsa


Any ideas why the dipped headlights on my corsa have stopped working - it is not the fuses.?

try changing the bulb or turning bulb around in the socket as the bulbs are polarity sensitive


What type of headlight bulb in a rover75?

Most Rover 75's use H7 for dipped beam and H1 for main beam headlights.


How do you change the low beam bulb on a gmc sierra 2005?

How do I change the low beam bulb in a gmc sierra 2005?


What does Bulb failure dipped beam?

It means you have a headlamp out. Check both high and low beams. They use the same bulb for both. It should be an H7.


You have no dipped beam on ns peugeot 406 its not the bulb or fuses Main beam and side lights still work on both sides what next?

replace high/low beam switch


Why don't i have a right hand dipped beam on my 2003 Audi A4?

Bulb or faulty wiring i would think. HTH


How do you change a citroen c3 drivers side headlamp bulb?

Headlight Dipped beam Bulb H7 Headlight Main beam Bulb H1 Requires lots of patience and time as vision and access is restricted. Open the cover of the headlight by undoing the clips. Detach the connector (wires) of the bulb. Then put your fingers inside to feel for the spring/clip which holds the bulb. You need to press the clip to release and then the bulb will come out. Good light and a small mirror will help to locate the clip. Replace the bulb, push back the clip to hold the bulb and push back the connector with the wires. Close and seal the unit properly otherwise you may get condensation and water inside the headlamps. This is for Headlight dipped beam bulb For the Main beam bulb , once you disconnect the connector (wire) of the bulb press and disengage the bars/clip to release the bulb. Replace the bulb and press to engage the bars/clip to hold the bulb and then continue as above.


How do you change the low beam headlight bulb on an S40 Volvo?

You can access the low beam headlight bulb from the engine compartment. Push the bulb holder in and turn. The bulb will come out.


How do you change a main beam light bulb in a Fiat Punto 2001?

Change the whole headlamp bulb. Should be a H4.


Change a main bulb in a citroen c3?

I presume you mean the Head light bulbHeadlight Dipped beam Bulb H7Headlight Main beam Bulb H1Check this link to see photo of clip holding the bulb: http://citroenc3owners.com/citroen-c3-tips/topic4.htmlRequires lots of patience and time as vision and access is restricted. Open the cover of the headlight by undoing the clips. Detach the connector (wires) of the bulb. Then put your fingers inside to feel for the spring/clip which holds the bulb. You need to press the clip to release and then the bulb will come out. Good light and a small mirror will help to locate the clip. Replace the bulb, push back the clip to hold the bulb and push back the connector with the wires. Close and seal the unit properly otherwise you may get condensation and water inside the headlamps. This is for Headlight dipped beam bulbFor the Main beam bulb , once you disconnect the connector (wire) of the bulb press and disengage the bars/clip to release the bulb. Replace the bulb and press to engage the bars/clip to hold the bulb and then continue as above.How_do_you_replace_a_main_light_bulb_on_a_citroen_c3How_do_you_replace_a_main_light_bulb_on_a_citroen_c3How_do_you_replace_a_main_light_bulb_on_a_citroen_c3Read more: How_do_you_replace_a_main_light_bulb_on_a_citroen_c3


My driver's side low beam is out the high-beam works fine i have replaced the bulbs checked the fuses and relays i have even swapped the bulb from the passenger side but still no lowbeam any ideas?

There are two different bulbd, 1 for dipped beam and 1 for full beam.