0
It means you have a headlamp out. Check both high and low beams. They use the same bulb for both. It should be an H7.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What type of headlight bulb in a rover75?
Most Rover 75's use H7 for dipped beam and H1 for main beam headlights.
You have no dipped beam on ns peugeot 406 its not the bulb or fuses Main beam and side lights still work on both sides what next?
replace high/low beam switch
Why don't i have a right hand dipped beam on my 2003 Audi A4?
Bulb or faulty wiring i would think. HTH
How do you fix right front dipped beam failure on a Saab 9 3?
As you probably know, it is not as easy as just replacing the bulb. Surprisingly complex! I decided the easiest option was to bring it to the dealer and for £10 they replace it. I find that the right dipped beam keeps failing every 3 to 4 months, which is very annoying. Maybe it is just this car, but I was wondering if anyone else has the same problem...
How do you fix right front dipped beam failure on a Saab 9-3?
As you probably know, it is not as easy as just replacing the bulb. Surprisingly complex! I decided the easiest option was to bring it to the dealer and for £10 they replace it. I find that the right dipped beam keeps failing every 3 to 4 months, which is very annoying. Maybe it is just this car, but I was wondering if anyone else has the same problem...
Where is the fuse located for the dipped beam on a Volvo V50?
doesnt have one. only main beam, dipped is controlled of a com
How do you change a citroen c3 drivers side headlamp bulb?
Headlight Dipped beam Bulb H7 Headlight Main beam Bulb H1 Requires lots of patience and time as vision and access is restricted. Open the cover of the headlight by undoing the clips. Detach the connector (wires) of the bulb. Then put your fingers inside to feel for the spring/clip which holds the bulb. You need to press the clip to release and then the bulb will come out. Good light and a small mirror will help to locate the clip. Replace the bulb, push back the clip to hold the bulb and push back the connector with the wires. Close and seal the unit properly otherwise you may get condensation and water inside the headlamps. This is for Headlight dipped beam bulb For the Main beam bulb , once you disconnect the connector (wire) of the bulb press and disengage the bars/clip to release the bulb. Replace the bulb and press to engage the bars/clip to hold the bulb and then continue as above.
My driver's side low beam is out the high-beam works fine i have replaced the bulbs checked the fuses and relays i have even swapped the bulb from the passenger side but still no lowbeam any ideas?
There are two different bulbd, 1 for dipped beam and 1 for full beam.
If you have no dipped beam on ns Peugeot 406 its not the bulb or fuses Main beam and side lights still work on both sides what next I replaced the high low beam switch and still wont work any answers?
Try the light switch
What bulb is needed for dipped lights on a 05 Honda accord?
dipped lights? What is dipped lights?
Where is the fuse for dipped head lights on a citroen c3?
Left dipped beam F9 rating 15 A Right dipped beam F10 rating 15 A Both fuses are in the fuse box under the bonnet
Change a main bulb in a citroen c3?
I presume you mean the Head light bulbHeadlight Dipped beam Bulb H7Headlight Main beam Bulb H1Check this link to see photo of clip holding the bulb: http://citroenc3owners.com/citroen-c3-tips/topic4.htmlRequires lots of patience and time as vision and access is restricted. Open the cover of the headlight by undoing the clips. Detach the connector (wires) of the bulb. Then put your fingers inside to feel for the spring/clip which holds the bulb. You need to press the clip to release and then the bulb will come out. Good light and a small mirror will help to locate the clip. Replace the bulb, push back the clip to hold the bulb and push back the connector with the wires. Close and seal the unit properly otherwise you may get condensation and water inside the headlamps. This is for Headlight dipped beam bulbFor the Main beam bulb , once you disconnect the connector (wire) of the bulb press and disengage the bars/clip to release the bulb. Replace the bulb and press to engage the bars/clip to hold the bulb and then continue as above.How_do_you_replace_a_main_light_bulb_on_a_citroen_c3How_do_you_replace_a_main_light_bulb_on_a_citroen_c3How_do_you_replace_a_main_light_bulb_on_a_citroen_c3Read more: How_do_you_replace_a_main_light_bulb_on_a_citroen_c3
