0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Where are steam valves located in a Kia sportage 1997?
kia's do not have steam valves, did you mean valve stems ? they are located on the tires where you put air in,the other term of valve stems is used usually when you did not change the timing belt and broke valve stems in the engine $$$$$$ .
How do you change valve stems?
if your talking about the oil seals that go around the valve stems, you can do it with some specialized tools. But if your talking about removing the valves which include the stems then your going to have to pull the heads to get them out.
Where is vavle stem seal for a kia 2001 sportage?
inside the valve springs,if your talking about the engine. if you mean valve stems ,there on each wheel. since your saying " seals " i assume your refuring to the engine head oil seals located on the valve stems inside each valve spring.
Where can pushrods be found in a engine?
Under the valve cover, of an overhead valve engine. They push the rockers on the opposite side of the valve stems. Overhead Cam engines do not have push rods.
How do you replace valve stem seals 1989 Jeep?
How do you replace valve stems and guides on a 1989 Jeep 4 Cylinder engine?
What happens when you change to regular valve stems from valve stem sensors?
The tire pressure monitor system will no longer function.
If you change the rims on a 2008 ram 1500 with tire pressure sensors are the sensors replaced with special valve stems?
The sensors are part of the factory valve stems. If the factory stems will not work in the aftermarket wheels there is no way of turning the light off.
Where are valve stems on 1998 mercury mountaineer?
The rubber valve stems are on the wheels , they allow you to put air in the tires
Why does your 1987 Corvette puff blue smoke when you first start it?
The engine valve stem seals are worn. Usually valve stem seal replacement is all that is needed, occasionally there is wear in the valve stems and/or valve guides which requires further repair.
Should you change Toyota engine 1300CC 12 valve carburetor to 1300CC 16valve EFI engine for better performance?
Yes of why not...you should complete change your 12 valve 1300 cc engine to 16 valve 1300 cc EFI Engine for better performance and less fuel,GAS consumption.
How would you change PVC valve without removing the engine on a 3.1 engine?
PVC is plastic pipe, It's called a PCV Valve in Automobiles. PCV stands for Positive Crankcase Ventilation. PCV valve. Engine removal is not required on any Automobile, I know of just to change the PCV valve. Some are hard to reach but that is it.
Your car smokes from the exhaust manifold area and tailpipe when the car is cold or been sitting up for a hour?
The cause could be worn valve guides. As the engine cools oil can seep down through the valve guides around the valve stems and collect in the head and top of the cylinders to be burned off when the engine is started.
