Blower Motor Removal & Installation With Air Conditioning 1. Disconnect the battery ground. > On trucks built for sale in California, remove the emission module located in front of the blower. 2. Disconnect the blower motor wiring at the blower. 3. Disconnect the cooling tube at the blower. 4. Remove the 4 mounting screws and pull the motor from the housing. To Install 5. Remove the clamp from the blower case and remove the blower cage. Mount the cage on the replacement motor. 6. Install the blower motor and tighten the 4 mounting screws. 7. Connect the cooling tube and wiring hardness. 8. Connect the negative battery cable. Check the blower motor for proper operation. 9. Cement the cooling tube on the nipple at the housing using Liquid Butyl Sealer D9AZ-19554-A, or equivalent.
heater core is in back of the glove box
To change the heater core in a 87 ford f150 is easy. Just remove the glove box and then behind it there is 7 bolts. After you remove the 7 bolts then just remove the cover and behind it is the heater core. By far the easiest heater core I ever changed.
heater is not getting hot
herman_love
The transmission dipstick on a 1988 Ford F-150 is on the drivers side of the engine bay. This will be back towards the firewall.
The 1988 F-150 doesn't have a master air flow sensor.
yes
how do you change heater blower resister merc a class
where is the computer on 1988 ford econoline 300 6cyl
no
ho change the head light bulb in a 2000 ford f- 150
You have to get to it from inside the truck. It is behind the glove box but you can only get to it from under the dash. After you have located it you just unbolt it and then put the new one on.