howdo you change the front axel of a dodge Dakota 2000 4x4
how do i change to front brakes on a dodge durango?
replace front brake rotors and pads.
Master cylinder. Located on the firewall, driver's side, in front of the brake booster.
1992 dodge dakotas do not have front coil springs, they have torsion bars instead.
Jack up The Dakota and remove the wheel. Unbolt the caliper and slide it off, being careful that the hose does not get damaged. The brake pads can be slid from the caliper and replaced at this point.
Lift the car, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
The Dodge Intrepid has front and rear brake hoses
How do you change front brake hose on a 1997 lincoln
Sticking brake calipers. This can be caused by moisture in the brake fluid which will cause the calipers to rust. Replace the calibers and replace all the brake fluid. It can also be caused by driving with your foot on the brake.
Remove brake caliper, then caliper mounting frame (2 bolts under frame)