Unless you have the proper tools and skill this can be a very dangerous repair. I suggest you seek professional help.
To change the coil springs on a 1991 Geo Storm, start by safely lifting the vehicle and securing it with jack stands. Remove the wheel and then the brake components if necessary, followed by the strut assembly bolts. Use a spring compressor to safely compress the coil spring before removing it from the strut. Install the new spring onto the strut, decompress it, and reassemble by reversing the disassembly steps.
To lift a 95 Geo Tracker by 2 inches, you can use aftermarket coil spring spacers or upgraded coil springs specifically designed for lift applications. Additionally, you might consider using lift kits that include new springs or spacers to achieve the desired height. Be sure to also check for compatibility with your vehicle and consider adjusting other components, like shocks, to maintain proper suspension geometry.
how to take off an emissions coil on a 1994 geo prizm
Front or Rear? Both
Just above the ignition coil on the firewall just in front of the driver
A 1995 Geo Metro ignition coil is tested by measuring the resistance across the coil. If it exceeds the manufacturer's recommendation, it must be replaced.
how do I get to the front bearing on a geo 4 wheel drive
http://www.kick-fix.com/t-belt/tbelt.html
check the pickup coil. that was the prob
The wire in center of distributor cap attaches to coil.
Firewall Drivers Side
Ignition Control Module.