Use a flathead and wedge it out
probably by removing the plastic cover under the front of the car and reaching in from there
pull head light clip down remove connector from bulb depress retaining clip extract bulb
For the Mk2: - place a flat-head screw driver in-between the reflector and sidelight. Then lever out the sidelight towards the front of the car. The plastic is quite bendy but don't use too much force, and the unit will pop out.
Honda Accord mk2 (03-08) takes the H1 Bulb Kit
yes if you change the slam panal front wings headlights and the bonnet lol
Yes but you would have to change the bonnet/front wings and slam panel.
Hi there, I had the same problem trying to replace a bulb but struggled. You need a screwdriver to place between the yellow inddicator & bonnet. The yellow indicator should just snap out of position, then you'll see the screws.
To change the gear knob on a golf MK2 too need the tool box that will help you open and get access to the area that has the gear knob. You can then change the gear knob from this point.
This is not a daft question. It's easy on a kangoo MK1, you can get to the sidelight bulb. On the MK2, the sidelight bulb in inaccessible due to the front torsion bar (but you can get to the main bulb) You will need to pull the headlight cluster clear to get to it & that requires a torx bolt and some messing around.
Open your boot up and you'll notice that there is one screw at the top of the light cluster you want to access. Remove this. Then go to the side. The little sideways V indicator lens at the front of the light assembly is separate from the rest of the lens. Insert a thin flat head screw driver under the long straight side of this little indicator lens, lever it outwards and upwards and towards the front of the car, it will pop out, (fitting is the reverse) Undo the two screws that will now be visible and gently pull the cluster away from the side outwards a little and rearwards, it will pop off, its held in by brackets and metal bars. When it's out you undo the necessary bulb anti clockwise and then the bulb itself can be removed and replaced. Fitting is the reverse of the operation
Autoglass....
no i dont think it will they are totally different shape