Remove brake caliper and hang it on a wire so as not to strain hose, then remove caliper mounting. Now tap back of rotor to remove it. Detach tie rod end from knuckle, remove ABS sensor (this is very tricky, they stick) Remove control arm from knuckle, Now undo large nut holding hub and drive axle and pull hub off. Now remove the 3 bolts holding bearing assembly. Replace in reverse order.
-This job is quite tricky if you are not a very experienced mechanic - I would highly recommend getting the Haynes manual . Available in most auto accessory stores and most libraries.
Change wheel bearing on 2006 mercury mariner
how do you change wheel bearing on 98 mercury mountaineer
Yes , a 1994 Mercury Sable is a front wheel drive vehicle
On a 2002 Mercury Sable the radiator is at the front of the engine compartment
On a 2004 Mercury Sable : The battery is in the drivers side of the engine compartment at the front
front of the motor
Mercury Sables are front-wheel drive.
On a 2001 Mercury Sable : The battery is located in the front of the engine compartment , on the drivers side
In a 1998 Mercury Sable : The transaxle is the transmission on your front wheel drive Mercury Sable it is located in the engine compartment , on the drivers side , bolted to the engine
On a Mercury Sable : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
firewall 1-----2-----3 4-----5-----6 front of Mercury Sable > driver
On a Mercury Sable , V6 : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver