Release the drive belt tensin and remove the drive belt from the pump. Clamp the reservoir hoses or empty reservoir and disconnect hoses from the reservoir. It may give better access if you remove the pulley from the pump. Unscrew the 4 bolts holding the pump to the bracket.Once refitted bleeding is done by turning the steering from lock to lock until no more bubbles in the reservoir, engine running to do this.
THE ABOVE POSTED IN ERROR
FECK KNOW'S
Depending on model, this engine may not have glow plugs. In engines with glow plugs, they are located next to the injectors on the top of the engine, under the plastic cover.
The Mazda 5 does not have glow plugs. Maybe you meant spark plugs?
To replace glow plugs on a Peugeot 405 turbo diesel, remove the connecting wire. Take off the 8 mm nut, followed by the 10 mm deep socket. Remove the old plugs and replace with new.
I had this problem and it was broken solder on the timing circuit board for the glow plugs
normally glow plugs are used on an IDi[ Indirect Injection] diesel engine. most peugeot 206 vehicles have an HDi engine[ Peugeot's nomenclature for Commonrail Direct injection]. hence there will be no glow plugs in those 206 vehicles. Some of the base model 206 from the first few years shipped with the non-HDi DW8 engine - which do have glow plugs. Check which model you have. If it's 1.9, then its the DW8. Else it is probably an HDi. Replace quickly if they start to fail.
how to change glow plugs on1997 mercedes 300e
Unless your ford focus is a diesel your car does not have glow plugs.
remove the connecting wire - 8mm nut i think, then 10 or 13 mm deep socket on each one and un-do
They are really hard to see but they are in a row underneath the big black box at the top of the engine. Cant seem to get in there though to change them...I am having problems!
The Cummins engine in a Dodge truck does not have glow plugs.The Cummins engine in a Dodge truck does not have glow plugs.
Glow plugs can easily be change on an Isuzu Trooper 3.0 TD. The old ones must be removed first and then the new glow plugs are installed using the same connections.