Want this question answered?
Ignition switch may be defective.
In the ( 1997 ) Mercury Mystique : The fuel pump shut off switch ( inertia switch ) is in the drivers footwell behind the kick panel ( there is an access hole ) * it's near the inside hood release *
how can you start a '89 mercury cougar with a broken ignition switch?
The 1991 Mercury Sable ignition switch is held in place with a retaining ring. Loosen the retaining ring. Pull the ignition switch out. Remove the wiring harness from the rear of the ignition switch. Reverse the process to install the new ignition switch.
To remove a ignition switch from a 1963 mercury meteor you must turn it off then unscrew it.
In the drivers footwell behind the kick panel ( there is an access hole in the panel ) according to the 1999 Mercury Mystique Owner Guide
I had the same problem on my 1996 Pontiac firebird, they told me that my ignition cylinder had went out. Maybe you could ask about that, I don't know what would cause that to go out though? I had a similar problem 1998 Mystique LS. It was a burnt out relay. Also the ignition switch (what the key turns on...I'm not a mechanic I think that is what it was called) was worn and I had to replace switch.
In a ( 1996 ) Mercury Mystique the fuel pump shut off switch ( inertia switch ) is in the drivers footwell behind the kick panel by your left foot . There is an access hole through the panel
If it is the same as the ( 1996 ) model year of Mercury Mystique , the fuel pump shut off switch ( inertia switch ) is in the drivers footwell , behind the kick panel ( there is an access hole ) * near the inside hood release
You don't. The ignition is required to start the car. If it fails you need a new ignition switch.
on the back of the block behind the intake
howdo you change an ignition switch on a 1996 gmc jimmy howdo you change an ignition switch on a 1996 gmc jimmy