on my 2001, if the same, the paneling just pulls off. i believe you start form the side. you can try feeling around with a screw driver or something thinner for the clips. just as long as you don't he-man it and break it off
Then the brake lights are out but the middle one still lights up. (:
how do i change to front brakes on a dodge durango?
Check the fuses and if they are good then check the brake light switch.
change the brake lights check the fuse check the brake light swtch
the back top paneling is just held on with clips, i believe if you start on the ends it's easier.
No. The one in the middle is a brake light, and should only come on when you put on the brakes.
I had this problem and it was a short in one of the back rear brake lights. One of the bulbs was not screwed in correctly and it was causing the brake light to stay on when the headligst are on. We removed all bulbs and inserted them again, making sure they were tight. This fixed our issue with a dodge 2003 durango.
the muscatel middle school! (^^)
the bulb could be blown or a bad connection. find out if there is a current al the way to the bulb socket.
it would be the brake light switch about 20 dollars at autozone
No, the 2004 Durango is a completely different brake system.
change the fuse if not replace flasher