Want this question answered?
the dipstick is located between the brake master cylinder and the valve cover.
On the drivers side of the engine near the exhaust manifold.
Using a funnel pour, into transmission dipstick cylinder. Driverside firewall where you checked the level.
very carefully
Many of these, depending on year, came as an assembly and could not be disassembled from the line or the slave cylinder.
The clutch pedal assembly has a clutch rod that pushes in on a clutch master cylinder. There is a hydro line that goes from the master cylinder to the slave cylinder.
part number for ford ranger dipstick T379221
the dipstick should be located on the driver side of the engine, pretty close to the brake fluid holder, or right in front of the middle spark plug hole on that side
== == On my 1995 Ford Explorer 4.0 L OHV ( same engine ) from end of " blade " to the plastic cap on the dipstick is ( 21 and 3/8 inches )
the slave cylander is located in the transmission on the 2002 Ford Ranger. Better see a mechanic to do the job.
The 2008 Ford Ranger , 2.3 liter Dual Over Head Cam , four cylinder engine has a timing CHAIN
Seals are probably shot. Replace the pump/reservoir assembly.