on automatics, you shouldn't have to flush with Chemtool liquid B-12 unless you have over 60,000 miles... If you want to flush, you add it to the tranny fluid and drive around the neighborhood(NO HIGH SPEEDS) for 5 minutes, then drain and refill the tranny with a new fluid and a new filter(IF EQUIPPED) the residual chemtool evaporates, and the trannys as clean as new...enjoy this also is an engine flush procedure(SAME B-12 chemtool) also.. Everyone should have a manual for their vehicle, and the local library should have a professional shop manual available to make copies of for FREE...make the time to take time to read up on your vehicle, and work like the PRO'S! Good luck :) Dave
where do you add the transmission fluid in a 1996 Honda accord 4 cylinderAnswerwhere do you add the transmission fluid in a 1996 Honda accord 4 cylinder
15000 miles
The 1996 Honda Accord transmission has a fluid capacity of 5.3 quarts. You can check the transmission fluid level with the transmission fluid dipstick.
you pull the drain plug on the side of the transmission
Change all the transmission fluid and replace the filter.
Fluid is inside the transmission.
Transmission fluid can be poured through the engine compartment on a Honda Accord. There is a dipstick and reservoir where the fluid can safely be placed.
Where is the transmission fluid temperature sensor on a 1998 Honda accord and how do you replace it?"
A 1993 Honda Accord automatic transmission requires 2.5 quarts of fluid.
If your Accord is an automatic, use the Honda automatic transmission fluid. With a manual, the Honda manual transmission fluid. I'd strongly suggest using genuine Honda fluid over a substitute.
where do I add brake fluid to my Honda accord 92
how do i check the transmission fluid on a 1988 Honda accord, it is a automated