Want this question answered?
It is in the heater box under the dash and it usually means removing the whole dashboard assembly.
The heater core in a Volvo S60 is typically located behind the dashboard on the passenger side of the vehicle. Accessing and replacing the heater core usually requires removing the dashboard and other components in the interior of the car. It is a complex and labor-intensive process best performed by a professional mechanic.
To change the heater core on a 1999 Chevy 4-wheel drive, first remove the dashboard and drain the coolant. Unbolt the core from its mounts and remove the dash panel to be able to change the heater core.
To remove and replace the heater core on the 1987 Nissan 300ZX with air, begin by removing the dashboard totally. This means the radio panel and the instrument cluster. Remove all air ducts and access the heater core. Remove the bolts holding the core and replace it with a new core. Then replace the dashboard and instrument panel.
How yo take a heater core out of 2002 lincoln navigator with 5.8 engine and can you do it without removing inside dashboard?
You do not need to completely remove the dashboard in order to change the heater core. Remove the water hoses from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
the HEATER CORE can be removed by removing the dash. how do i ghange the dash
Heater core will come out under the dash on the passenger side. it is possible to change the core without removing the heater housing. there was two different size cores as I remember but both will fit.
The 1996 GMC half ton pickup truck heater core can be removed by removing the heater core retaining bolts. Remove the heater core water lines. Reverse the process to install the new heater core.
remove radio, heater control, glove box, dashboard trim & bezels. once you do this you can see a tublar bar which the dashboard secured to. remove the dashboard and the heater core is there in the center
The heater core is inside the heater unit on the passenger side under the dashboard
Replacement of the heater core on a 1993 Mazda Protege is going to first require the removal of the entire dashboard. Once that is removed then the heater control box will need to be removed and disassembled in order to get access to the heater core inside.