0
Open the tailgate and remove the two screws holding the trim piece. Make a small slit in the insulation to reach the lamp plugs. Turn and pull out. The lamps are now easy to replace. The owner manual instructions are to see the dealer. It's an easy replacement once you start investigating.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How do you Change licence plate bulbs on a Honda Civic?
Well if you open your trunk you will be able to access your plate bulbs and help you change them with ease.
How do you change the license plate bulbs on a 2000 Pontiac Sunfire?
in the rear facia, under the trunk lid there is 9 bolts holding the facia on. You must remove the nuts and pull the facia out and right above the license is the two bulbs 194. replace the bulbs and put the facia back on and you are on your way.
How do you change the license plate light bulbs on a 96 Pathfinder Le?
you need to remove the inside panel to get to these bulbs
How do you replace license plate bulb on 2008 Pontiac G8?
You need to remove the liner on the trunk lid. That will give you access to the license plate lights housing. Remove the sockets by twisting 1/4 turn and replace bulbs. Size for bulbs are 2825
How do you change the brake light bulbs on a 1994 Chevy Corvette?
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
How do you change license plate bulbs on mercedes c280?
They are located inside the trunk lid, underneath the felt lining. You need to unsnap and pull back the felt lining to access the bulbs for the license plate light.
How do you change the license plate bulbs in the Hyundai Atos?
From the outside of the car.. Just un-screw the two screws and change the bulb.
How do you change the license plate bulbs on a zx2?
From inside the trunk,twist the socket counterclockwise to remove the socket...
How do you change the license plate bulbs on a 1997 Nissan Pathfinder?
through the rear package compartment under the matting
How do you change the license plate light bulb on Mazda protege?
There are two housings above the plate all you need is a Phillips head screw driver remove the 4 bolts and change the bulbs it's that easy
How do you replace the bulbs on a 1999 Pontiac Sunfire so that the 'Pontiac' lights up on the trunk lid if you can't find a way into the lights?
It is one big peice that must be removed. If you open the trunk, look on the inside of the lid behind the license plate, and you will find a few nuts that once removed, will allow you to remove the entire rear facia panel that the license plate bolts to and which houses the "PONTIAC" lights.
How do you change the liscence plate light on a Pontiac Sunfire?
To change the license plate light on a Pontiac Sunfire, first remove the cover over the bulb with a small screwdriver. Gently push on the bulb and turn 1/4 turn to remove the old bulb. Insert the new bulb and snap in the cover.
