Want this question answered?
1999olds have coil packs remove cover and pack on top of engine plugs should be right there no wire only thing need is boot replacements for the pack if needed
Buy a new set and remove and change ONE WIRE AT A TIME from plugs/distributor cap.
Between the cylinder head the spark plug wire.
Remove the spark plugs wire and remove the plugs wit a spaerk plug wrench or socket.
Mark and remove plug wires. Remove spark plugs and install new plugs. Reattach plug wire to correct plug.
You can change the spark plugs on the 1997 Toyota Tacoma yourself. Remove the ground wire and spark plug wire. Remove plug. Replace the plug with a plug made specially for your model car.
Pull wire off the spark plug
There are no wires to change - coil over plug. To change the plugs unscrew the old ones. put the new ones in their place. Torque to spec.
Yes, if you can pull any wire off with no change youll def want to change the plugs and wires
its easy to do.only do ONE wire at a time.take off ONLY one wire,then put the same size new wire on.clip it into the same places the old wire was.then do one more.and then another,then another till your done.its a good time to change the plugs too.but do it the same way.ONLY ONE PLUG AND WIRE AT A TIME! ask the parts salesman how to [gap] the plugs,its importent to gap the new plugs ,and also easy to do. take your time.
It is most likely your spark plugs and or wire set. All of this is easy to change. There is another forum that explains how to change your spark plugs for your Galant.
you push in the wire after turning of the plug yhen get some pluers and get it out