Want this question answered?
How do you replace the front wheel bearings on a nissan frontier 4x4 1999
The cost of replacing the wheel bearings on a 1999 Oldsmobile Aurora is about $120. This depends on the hourly cost of the mechanic.
The wheel bearings in the 1996 and newer Taurus / Sables cannot be greased.See "Related Questions" below for information / procedures for replacing wheel bearings.
you have to take it to a machine shop to press off then press new one on
If it is 4x4, you have to replace the whole hub
How do you change rear wheel bearing on 1999 alero?
On your 99 fatboy you have timken tapered wheel bearings on the 01 fatboy you have sealed wheel bearings that aren't interchangeable. Timken does however make a cross reference replacement for the sealed wheel bearings. Due to the bearings having different axle bolt diameters
replace wheel bearings
You will have to give more information to get a good answer. Two wheel or 4 wheel drive, front or rear, etc.,, What year is it? Front wheel bearings on the mid 90" should be easy to change. Just remove the wheel, remove the bearings and the races (will have to be pressed or knocked out of the hub) then replace the races, first, then the bearings. Put plenty of grease on them . You should replace the seals as well. On the 1999 and probably later, you will find that they have a "double set" of bearings for each wheel with only one bearing race. You will have to have the old race pressed out at a machine shop and the new one pressed in, again press the bearings and put in new seals. Will cost over $100 per wheel for the bearings and machine work in most places, plus the cost of the seals.
dude i wish i knew...
For a 1999 Solara v6, the oil capacity is 5 qts. of 5W30.
you must repalce the whole hub since it comes as a assembly.