Want this question answered?
To change the shifter cable on a 1998 Oldsmobile Silhouette, first you need to disconnect the cable from the shifter, then disconnect it from the engine's control arm. Then replace it with the new cable and make sure it is functioning.
To change the shift linkage in an 1998 automatic Chevy Cavalier the shift linkage needs to be removed from the transmission and pulled from the cabin. The job requires removing the floor console to access the cable. After doing the so the cable can be snaked from inside the cabin, the install is the reverse of the removal.
Under the shifter cable on top of transmission.
You don't. There is not a clutch cable on a 1998 integra. It has a hydraulic clutch.
How do you remove the driver side door panel of a 1998 VW Beetle to replace the door handle cable?
this sounds like a problem i had on my 2000 you need to look into having the shifting cable replaced. some of the late 90 models have had a recall on the shifter and if you are in that recall, you can go to a dodge dealer and they replace it for free, that was my case.
the shifter lock out switch is in the brake, remember how you couldn't pull it out if park with out hiting the brakes my 96 sephia had this problem and we replaced the nutrel safety switch and the shifter lock thing on the brake pedel in side the car good luck. Also, you may have broken the gear cable. You will need to examine the shifter and make sure the cable is still attached.
I have a 1998 Jimmy SLT, automatic with floor shifter. It is easier than you might think. If you look closely on the back of the shifter knob there is a retaining pin, looks like a large brad type nail, just pry it out and lift up.
its best to change it at or before every 100,000 miles
LOOK for the bolts in front of the battery compartement. Use a ratchet.
where is the starter relay on a 1998 vw beetle
what is the torque 1998 beetle front spindle