Your in luck this ones easy. I recently did this to my own 300zx 2+2. If you don't have a lift like most of us just jack up the right side of your car. You don't need to do both sides but you can if you want. Shimmy under your car and locate your transmison. You should find your starter mounted on the bottom right next to the starter but behind your headers. First remove the heat sheild. You have to do this or you won't have enough room to wiggle it out. There are 3 screws that must come out. One on the bottom, top, and on the left side. Once you have that off disconect the power coupling. Its one wire. Then take out the three bolts holding it in. Drop it off and reverse. Its pretty fricken easy on this one. Just make sure you don't strip any screws. Other wise you have to take off part of the exhaust.
how do you change the starter on 93 525i BMW
how to change starter on Hyundai scoupe 1993 12 valve
What engine ?
The best option is probably to replace the entire starter.
what sensor?
To change a starter from a 1993 Acura Integra remove the mounting bolts that connect it to the transmission. Then unplug the solenoid from the wire harness. Install the new unit.
Differentional L
no power to starter on Nissan 300zx twin turbo
next to the transmission
On the underside, passenger side, of the transmission.
To change PVC valve on a 1993 Nissan 300zx, first remove the oil dip stick and remove the tension clip from the PVC valve hose. Then remove the hose and the old PVC valve. Replace with a new PVC valve.
As long as the engine is VG30DE.