Since the strut bearing is part of the strut-coil spring assembly, the whole thing will have to come out and be disassembled.
See "Related Questions" below for extensive information on these procedures.
It's near the base of the strut on the inside
Although there is a snap ring retaining the bearing, you will need to take the strut to a mechanic and have the bearing pressed out. If you take out the three bolts on the top of the strut tower, and disconnect the ball joint at the bottom, you won't have to worry about throwing the alignment out.
How do you change the water pump in a 2002 ford Taurus
If you mean front strut, yes, they are the same. Rear are different between wagon and sedan.
Remove brake caliper and caliper frame, then take out rear spindle and remove bearing from it. Refit new one opposite way.
how do you change the front motor mount on a pice of crap 90 Ford Taurus
Low transmission fluid or a bearing is going out.
It is in the very corner of right side firewall behind strut tower
A link with more information on this process can be found in related links.
Change ignition.
It cost me 120 for part and 120 for labor
Compress the strut spring with a spring compressor. Remove the retaining bolts from the top and bottom of the strut. Remove the strut assembly. Reverse the process to install the new strut.