The assembly is all one kit. It will cost you approx. $140. Open the rear door to the cover, remove the plastic panel behind the tire wheel. This will expose the guts to the light assembly. Remove nuts that hold assembly in place, remove lamps, and detach. Reinstall the same way. The new assembly will not come with lamps, you will need to reinstall the old lamps or order new lamps. It's very easy.
Look in the trunk, there is a cover over the light assembly - open and you will have access to change the light.
how do i change a parking light bulb on a 2003 hyunadi accent
how do you change the light on the gear shift of a 2003 Lincoln navigator
There are two Philips screws inside the bed. Lower the tailgate and you can see them...
all you have to do is unscrew the bolt that's on the tail light cover and the whole thing will come out. Then you just twist the light fixture to pop them out of the cover. Here is a video on how to do it: http://www.youtube.com/watch?v=HqXs8Uk3pbs
You don't, you change the bulb from inside the luggage area. To replace a broken red plastic tail light cover on a 2003 Ford Focus SE, open the trunk of the car. Look in the area inside the trunk opposite of where the tail light is located on the outside of the car. There will be 3 thumbscrews and one Phillips head screw used to attached the tail light cover. Remove all the screws. Pull the broken light cover away from the body of the car. Replace with new tail light cover and replace and tighten screws.
When it leaks.
dont
About one hour.
you take out the old light and put the new one in
how do you change a front turnsignal lightbulb on a 2003 monti Carlo
To change the air filter on the 2003 Mustang Cobra, you will need to first remove the air filter cover. Then, pull the filter out of the reservoir and add the new filter. Replace the cover.